Slot Machine Tokens - Quarter Size Tokens-
Adjust the position of the wire or screws if the quarter gets stuck. Insert a quarter and observe what happens. Put the tokens in an absorbent towel folding them in like a sack and shake the heck out of them! I've found great success at cleaning with a mixture of 4 parts hot water to one part CLR in a large glass bowl. Do this for 12 minutes and then thoroughly rinse all the solution off. Loosen the screws holding the rail with a screwdriver and reposition them in their slots so that the raceway is slightly narrower.
How to Convert My Japanese Slot Machine to Take Quarters By Chris Deziel ; Updated April 12, You won't have any trouble finding slot machines in any Japanese city, because there are slot parlors near the train stations and in most shopping districts. Turn the unit over and you will see the two adjustment screws as shown in Fig. Unplug the machine from its power source. Drain changing slot machine tokens quarters saving CLR water for next batch.
Close up your machine and get a handful of quarters.
Depending on the type of machine you have, it may fall out of the front of the coin mechanism or out of the bottom. The most secure way to pay that there is! Then drop a few quarters and watch them fall out the back of the slide.
The reason they fall out the back is because they are slightly shorter than the token and the square hole cut out in the slide allows the top edge of the quarter to fall out and not the token.
Cash Control - Less supervision of your staff is required. Be sure to turn it the right way before insertion. Gently snap the tabs back into place. Cover the hole through which the quarter fell, if there is one, with cellophane tape. Find the tabs on the plastic cover, which was removed in step 3.
Plug in the machine and test it by inserting a quarter into the slot.
Immediate Sale - When you sell your tokens, you have made a sale. Another idea is to give away one token when a particular item is purchased. Glue it to the path with contact cement so that a quarter fits comfortably between the tie and the opposite side of the path without binding or getting stuck.
Use the photos as a reference. How to Convert Tokens to Quarters for a Yamasa By Chris Deziel ; Updated April 12, The Japanese parlors that feature the vertical pinball machines known as pachinko usually have a section devoted to slot, or pachislo machines, which bear a passing resemblance to Vegas-style slot machines. Promotions - There are literally hundreds of promotional ideas by which tokens can increase your sales and profits.
When properly adjusted, there should be a very small lip between the metal track and the plastic side lip. Insert one of the tokens that came with the machine into the coin slot on the outside of the door and observe its path as it drops down. You will see a slide the coins ride down. Open the door with the key supplied with the machine and pull it out.
Slot machines are called pachi-slo in Japan, and they are part of an industry fueled by manufacturers who regularly roll out new models. For example, one idea is to offer a discounted price for tokens on certain days to bring in additional business. The path should be close to one of the sides.
I used hot glue to attach this strip. Do this until they are dry.
Close the door and lock it. When the customer has collected ten tokens, he can present them for a free item. Insert a quarter into the front of the mechanism and observe its path as it drops through. You need some ordinary every day type scotch tape like that shown here. Loosen both screws and center them in their respective slots.
Plug in the machine and turn on the main power switch, usually located just above the coin hopper.
The exact method depends on the manufacturer of the machine you have. Open the front of the machine and look at the back of the front door. Make the raceway narrower by gluing a strand of gauge metal wire to one side of it with hot melt glue.
As stated previously, some minor adjustment may be necessary. Then snap in the other side. You will also notice that I added a small strip of plastic along the bottom rail to ensure reliable feeding. The machine should register the coin by indicating one credit on the illuminated display on the front of the machine.
To get the machine to accept the quarter, you have to cover the hole through which the quarter fell or make the raceway inside the mechanism slightly narrower. Power on the machine. Turn off the machine and unscrew the coin mechanism from the inside of the door.
Security - Nobody will break into your business or coin operated machines to steal tokens. The kind Grandma used to have. Close the machine door and lock it after you have made the adjustments.
Locate the coin mechanism on the inside of the door, just behind the coin slot on the outside of the machine.
Your tokens will look like new. As shown in Fig. Quarter Conversion for Universal and Aruze Type Pachislos Using your key, open the front of the machine and locate the coin mechanism as shown changing slot machine tokens quarters Fig. You may have to wiggle the door or jerk it upwards to loosen the catch. The machine must be on when you do this or it won't accept the coin.
Mechanisms with holes that prevent the user from inserting smaller coins are common on machines with horizontal coin slots. Unplug the wires, loosen the screw changing slot machine tokens quarters it to the door with a Phillips screwdriver and pull it out, rotating it as you do so.
Yamasa is the third-leading supplier of pachislo machines, and in held an 8.
Price Flexibility - You can easily change the number of tokens sold per dollar to immediately take advantage of any marketing or promotional ideas. There is a one- to three-year turnaround for machines in Japanese parlors, and old ones are often sold on the foreign market as collector's items.
The token does not need to be used immediately. Cut both ends off a plastic cable tie with a utility knife, making the cable the same length as the coin path. Insert the key that came with the machine into the slot in the door, turn it through 90 degrees and open the door. Clean the mechanism with a cotton swab moistened with rubbing alcohol.
Re-insert the plug into the proper socket. Reconnect the wires and attach the coin mechanism to the door.
These "walk-away" tokens encourage repeat business. Disconnect the plug Fig. The machine won't operate normally until the door is locked. Some adjustment may be necessary for reliable feeding. They should, if adjusted properly, continue out to the right side of the mechanism, NOT fall out the front.
Slot machine bl2 Japan, the machines accept tokens, but you can modify them to accept quarters. Adjust the position of the bottom rail in the coin mechanism upward if the machine has a vertical coin slot.